 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN4633A PNP/NPN Epitaxial Planar Silicon Transistors 2SA1882/2SC4984 Low-Frequency General-Purpose Amplifier Applications Applcations * Low-frequency power amplifier applications. * Medium-speed switching. * Small-sized motor drivers. Package Dimensions unit:mm 2038A [2SA1882/2SC4984] 4.5 1.6 1.5 Features * Large current capacity. * Low collector-to-emitter saturation voltage. 0.4 3 1.5 0.5 2 3.0 0.75 1 1.0 2.5 4.25max 0.4 Specifications ( ) : 2SA1882 Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (250mm2x0.8mm) 1 : Base 2 : Collector 3 : Emitter SANYO : PCP Conditions Ratings (-)15 (-)15 (-)5 (-)1.5 (-)3 (-)300 1.3 150 -55 to +150 Unit V V V A A mA W C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE1 hFE2 fT Cob VCB=(-)12V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)50mA VCE=(-)2V, IC=(-)1A VCE=(-)2V, IC=(-)50mA VCB=(-)10V, f=1MHz 140* 70 (300) 200 (15)10 MHz MHz pF Conditions Ratings min typ max (-)100 (-)100 560* Unit nA nA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 92500TS (KOTO)/91098HA (KT)/51794TH (KOTO) BX-0238 No.4633-1/5 2SA1882/2SC4984 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Symbol VCE(sat)1 VCE(sat)2 Conditions IC=(-)5mA, IB=(-)0.5mA IC=(-)500mA, IB=(-)25mA (-)15 (-)15 (-)5 Ratings min typ (-)10 (-)120 (-)0.9 max (-)25 (-)240 (-)1.2 Unit mV mV V V V V VBE(sat) IC=(-)500mA, IB=(-)25mA V(BR)CBO IC=-10A, IE=0 V(BR)CEO IC=-1mA, RBE= V(BR)EBO IE=-10A, IC=0 * : The 2SA1882/2SC4984 are classified by hFE values at IC=50mA as follows : Rank S 140 to 280 T 200 to 400 U 280 to 560 Marking : 2SA1882 : AI 2SC4984 : CT --800 hFE IC -- VCE mA 2SA1882 Collector Current, IC - mA --600 --3mA Collector Current, IC - mA --7mA --6mA --8 A --5m 800 IC -- VCE 8mA 7mA 6mA 5mA 4m A 2SC4984 --4mA 600 3mA 2mA --400 --2mA 400 1mA --1mA --200 200 0 0 --0.2 --0.4 --0.6 --0.8 IB=0 --1.0 ITR04972 0 0 0.2 0.4 0.6 0.8 IB=0 1.0 ITR04973 Collector-to-Emitter Voltage, VCE - V --200 Collector-to-Emitter Voltage, VCE - V 200 IC -- VCE --1. 0mA IC -- VCE 0.7mA 0.6mA --0.8mA 2SC4984 Collector Current, IC - mA Collector Current, IC - mA --160 160 --0.6mA 0.5mA 0.4mA --120 120 --0.4mA --80 0.3mA 80 0.2mA 40 --0.2mA --40 0.1mA 0 0 2SA1882 --1 --2 --3 IB=0 --4 --5 ITR04974 0 0 1 2 3 IB=0 4 5 ITR04975 Collector-to-Emitter Voltage, VCE - V --1.6 --1.4 Collector-to-Emitter Voltage, VCE - V 1.6 1.4 IC -- VBE 2SA1882 VCE= --2V Collector Current, IC - A IC -- VBE 2SC4984 VCE=2V Collector Current, IC - A --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 ITR04976 1.2 1.0 0.8 0.6 0.4 0.2 0 0 0.2 0.4 0.6 0.8 1.0 1.2 ITR04977 Ta=7 5 C 25C --25C Base-to-Emitter Voltage, VBE - V Base-to-Emitter Voltage, VBE - V Ta=7 5 C 25C --25C No.4633-2/5 2SA1882/2SC4984 1000 7 5 hFE -- IC 2SA1882 VCE= --2V 1000 7 5 hFE -- IC 2SC4984 VCE=2V Ta=75C --25C 25C DC Current Gain, hFE 2 DC Current Gain, hFE 5 7 --0.1 2 3 5 7 --1.0 2 3 5 3 Ta=75C 25C --25C 3 2 100 7 5 3 2 100 7 5 3 2 10 7 --0.01 2 3 10 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC - A 7 ITR04978 7 Collector Current, IC - A ITR04979 f T -- IC Gain-Bandwidth Product, fT - MHz 2SA1882 VCE= --2V f T -- IC 2SC4984 VCE=2V Gain-Bandwidth Product, fT - MHz 5 3 2 5 3 2 100 7 5 3 2 100 7 5 3 2 10 5 7 --0.01 2 3 5 7 --0.1 2 3 5 10 Collector Current, IC - A 100 7 7 --1.0 2 ITR04980 100 5 7 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC - A 7 1.0 2 ITR04981 Cob -- VCB 2SA1882 f=1MHz Output Capacitance, Cob - pF Cob -- VCB 2SC4984 f=1MHz 7 5 Output Capacitance, Cob - pF 5 3 3 2 2 10 7 5 3 5 7 --1.0 2 3 5 7 --10 2 ITR04982 10 7 5 3 5 7 1.0 2 3 5 7 10 2 ITR04983 Collector-to-Base Voltage, VCB -- V 5 Collector-to-Base Voltage, VCB -- V 5 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 2SA1882 IC / IB=20 C 25 VCE(sat) -- IC 2SC4984 IC / IB=20 C 25 Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 3 2 3 2 --100 7 5 3 2 100 7 5 3 2 C 5 =7 C Ta 5 --2 = Ta 75 C 5 --2 C --10 7 5 5 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 ITR04984 10 7 5 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 ITR04985 Collector Current, IC - A Collector Current, IC - A No.4633-3/5 2SA1882/2SC4984 --10 7 VBE(sat) -- IC 2SA1882 IC / IB=20 Base-to-Emitter Saturation Voltage, VBE (sat) - V 10 7 5 VBE(sat) -- IC 2SC4984 IC / IB=20 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 3 2 3 2 --1.0 7 5 25C Ta= --25C 75C 1.0 7 5 Ta= --25C 75C 25C 3 2 5 7 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 ITR04986 3 2 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 ITR04987 Collector Current, IC - A 5 3 2 Collector Current, IC - A 5 3 ASO ICP 30 ASO ICP IC DC 30 s 0 Collector Current, IC - A --1.0 7 5 3 2 --0.1 7 5 3 2 2 Collector Current, IC - A IC DC 2 1.0 7 5 3 2 0.1 7 5 3 2 2 3 s 0 s 1m s 1m ms 10 ms 10 op era op tio n era tio n Mounted on a ceramic board(250mm2x0.8mm) 3 5 7 --1.0 2 3 5 7 --10 2SA1882 Ta=25C Single pulse Mounted on a ceramic board(250mm2x0.8mm) 2 3 5 7 1.0 2 3 5 7 10 2 3 2SC4984 Ta=25C Single pulse Collector-to-Emitter Voltage, VCE - V 1.4 1.3 1.2 ITR04988 Collector-to-Emitter Voltage, VCE - V ITR04989 PC -- Ta 2SA1882 / 2SC4984 M ou nt Collector Dissipation, PC - W 1.0 ed on ac er 0.8 am ic bo 0.6 ar d (2 50 m 0.4 m2 x0 .8 m m 0.2 0 0 20 40 60 80 100 120 ) 140 160 Ambient Temperature, Ta - C ITR04990 No.4633-4/5 2SA1882/2SC4984 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2000. Specifications and information herein are subject to change without notice. PS No.4633-5/5 This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of 2SC4984
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |